| 1 / 8" x 60" Loopco Slitting |
| Product: |
Galvanized, Galvanneal, Cold Roll, HRPO (Pre-Painted: Inquire) |
| Tooling: |
Shimless |
| Gauge: |
.0201 - .130 |
| Entry Width: |
60" Max / 1" Min |
| Exit Width: |
0.625" Min |
| Entry ID: |
20" / 24" |
| Entry OD: |
73" Max |
| Exit ID: |
20" / 24" |
| Entry Weight: |
44,000 lb Max Coil |
| Exit Weight: |
44,000 lb Max Coil |
| Min Trim: |
0.5000" Min Allowance |
| Std Tolerance: |
+ / - .005" | |
| �" x 68" Stamco Slitting |
| Product: |
Hot Roll, HRPO, Galvanized |
| Gauge: |
.048 - .260 |
| Entry Width: |
68" Max / 30" Min |
| Exit Width: |
1.625" Min Width |
| |
8" Max Width if > .200 ga |
| Entry ID: |
24" / 30" |
| Entry OD: |
76" Max |
| Exit ID: |
20" / 24" |
| Entry Weight: |
60,000 lb Max Coil |
| Exit Weight: |
60,000 lb Max Coil |
| Min Trim: |
0.750" Min Allowance |
| Std Tolerance: |
+ / - .005" | |
| 3/16" x 60" ProEco Slitting with In Line Kor-Flex Leveling |
| Product: |
Hot Roll, HRPO, Galvanized, Galvanneal |
| Gauge: |
.040 - .200 |
| Entry Width: |
60" Max / 12" Min |
| Exit Width: |
1.500" Min Width |
| Entry ID: |
20" / 24" / 29" |
| Exit ID: |
20" / 24" |
| Entry OD: |
72" Max / 28" Min |
| Entry Weight: |
50,000 lb Max Coil |
| Exit Weight: |
50,000 lb Max Coil |
| Min Trim: |
0.500" Min Allowance |
| Std Tolerance: |
+ / - .005" | |
| 1/2" x 72" Herr-Voss Cut-to-Length |
| Features: |
In-Line Primary and Precision Levelers |
| Product: |
Hot Roll, HRPO, Galvanized, Galvanneal |
| Gauge: |
.054 - .500 |
| Width: |
24" Min / 72" Max |
| Length: |
49" Min / 240" Max (.054 - .149) |
| |
24" Min / 350" Max (.150 - .169) |
| |
24" Min / 480" Max (.170 - .500) |
| Weight: |
60,000 lb Max Coil |
| Grade: |
70,000 Max Yield |
| Std Tolerance: |
+ .250" / -0.000" | |
| 3/8" x 144" Wysong Blanking Shear |
| Product: |
Hot Roll, HRPO, Galvanized / Galvanneal |
| Gauge: |
Mild Steel .054 - .375 |
| |
High Strength
GR 50 Max .054 - .300 |
| Entry Size: |
72" x 144" Max |
| Exit Size: |
9" Min x 144" Max |
| Weight: |
5,000 lb Max Lift |
| |
500 lb Max Sheet |
| |
24" Max Lift Height |
| Std Tolerance: |
+ / - .062" | |
- Tensile, Yield, Elongation and Rockwell Testing
|
- Plant 1: 164,000 Sq Ft Indoor Climate Controlled facility
Outdoor Storage is available
- Plant 2: 80,000 Sq Ft Indoor Climate Controlled facility
|
- NS/CSX Rail service at both plants
- Car types loaded: Gondola / Boxcar / Flatcar
- Material types loaded: Slit coil, Master coil , Sheets
|
- Up-ending / Break-for-Weight Painted coil for Bldg Prods industry
|
Note: The information found on this website is subject to change without notice. Contact us to verify current status on any information found herein. |
